Welcome!

Francois Lascelles

Subscribe to Francois Lascelles: eMailAlertsEmail Alerts
Get Francois Lascelles via: homepageHomepage mobileMobile rssRSS facebookFacebook twitterTwitter linkedinLinkedIn


Related Topics: Intel XML, XML Magazine, SOA Best Practices Digest, Java Developer Magazine, SOA in the Cloud Expo, CIO/CTO Update

Blog Feed Post

REST JSON to SOAP Conversion Tutorial

Imagine the geoloc web service for recording geographical locations

I often get asked about ‘REST to SOAP’ transformation use cases these days. Using an SOA gateway like SecureSpan to perform this type of transformation at runtime is trivial to setup. With SecureSpan in front of any existing web service (in the DMZ for example), you can virtualize a REST version of this same service. Using an example, here is a description of the steps to perform this conversion.

Imagine the geoloc web service for recording geographical locations. It has two methods, one for setting a location and one for getting a location. See below what this would look like in SOAP.

Request:

<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<geo:getPosition xmlns:geo="http://test.layer7tech.com/geolocws">
<geo:trackerId>34802398402</geo:trackerId>
</geo:getPosition>
</soapenv:Body>
</soapenv:Envelope>

Response:

<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<geo:getPositionRes xmlns:geo="http://test.layer7tech.com/geolocws">
<geo:latitude>52.37706</geo:latitude>
<geo:longitude>4.889721</geo:longitude>
</geo:getPositionRes>
</soapenv:Body>
</soapenv:Envelope>

Request:

<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<geo:setPosition xmlns:geo="http://test.layer7tech.com/geolocws">
<geo:trackerId>34802398402</geo:trackerId>
<geo:latitude>52.37706</geo:latitude>
<geo:longitude>4.889721</geo:longitude>
</geo:setPosition>
</soapenv:Body>
</soapenv:Envelope>

Response:

<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<geo:setPositionRes xmlns:geo="http://test.layer7tech.com/geolocws">OK</geo:setPositionRes>
</soapenv:Body>
</soapenv:Envelope>

Here is the equivalent REST target that I want to support at the edge. Payloads could be XML, but let’s use JSON to make it more interesting.

GET /position/34802398402

HTTP 200 OK
Content-Type: text/json

{
'latitude' : 52.37706
'longitude' : 4.889721
}
POST /position/34802398402
Content-Type: text/json

{
'latitude' : 52.37706
'longitude' : 4.889721
}

HTTP 200 OK

OK

Now let’s implement this REST version of the service using SecureSpan. I’m assuming that you already have a SecureSpan Gateway deployed between the potential REST requesters and the existing SOAP web service.

First, I will create a new service endpoint on the gateway for this service and assign anything that comes at the URI pattern /position/* to this service. I will also allow the HTTP verbs GET and POST for this service.

REST geoloc service properties

Next, let’s isolate the resource id from the URI and save this as a context variable named ‘trackerid’. We can use a simple regex assertion to accomplish this. Also, I will branch on the incoming HTTP verb using an OR statement. I am just focusing on GET and POST for this example but you could add additional logic for other HTTP verbs that you want to support for this REST service.

Regex for REST service resource identification

Policy branching for GET vs POST

For GET requests, the transformation is very simple, we just declare a message variable using a SOAP skeleton into which we refer to the trackerid variable.

SOAP request template

This soap message is routed to the existing web service and the essential elements are isolated using XPath assertions.

Processing SOAP response

The REST response is then constructed back using a template response.

Template JSON response

A similar logic is performed for the POST message. See below for the full policy logic.

Complete policy

You’re done for virtualizing the REST service. Setting this up with SecureSpan took less than an hour, did not require any change on the existing SOAP web service and did not require the deployment of an additional component. From there, you would probably enrich the policy to perform some JSON schema validation, some URL and query parameter validation, perhaps some authentication, authorization, etc.

Read the original blog entry...

More Stories By Francois Lascelles

As Layer 7’s Chief Architect, Francois Lascelles guides the solutions architecture team and aligns product evolution with field trends. Francois joined Layer 7 in the company’s infancy – contributing as the first developer and designing the foundation of Layer 7’s Gateway technology. Now in a field-facing role, Francois helps enterprise architects apply the latest standards and patterns. Francois is a regular blogger and speaker and is also co-author of Service-Oriented Infrastructure: On-Premise and in the Cloud, published by Prentice Hall. Francois holds a Bachelor of Engineering degree from Ecole Polytechnique de Montreal and a black belt in OAuth. Follow Francois on Twitter: @flascelles